Home > Products > Desiccant Adsorbent > Molecular Sieve

3A Molecular Sieve Adsorption for Gas Dehydration

3A Molecular Sieve Adsorption for Gas Dehydration storage: room temperature, relative humidity is not greater than 90%; it should not be directly exposed to the air; avoid water, acid and alkali.

Download
Product introduction 

3A Molecular Sieve Adsorption for Gas Dehydration regeneration: 

  1. Water removal: It depends on the pressure, temperature, and water content of the regeneration gas. Generally, the dry gas at 200-350 ° C passes through the molecular sieve bed at a pressure of 0.3-0.5kg / cm2 for 3 to 4 hours, so that the outlet temperature reaches 110-180 ° C and is cooled.

  2. Removal of organic matter: use water vapor to replace organic matter, and then remove water.


3A Molecular Sieve Adsorption for Gas Dehydration storage: room temperature, relative humidity is not greater than 90%; it should not be directly exposed to the air; avoid water, acid and alkali.

3A Molecular Sieve Adsorption for Gas Dehydration packaging: 25KG cardboard drum or bag. Loss of ingredients, food additives that prevent mold spoilage and prolong storage time.


Application:

1. Drying of various liquids (such as ethanol)

2. Drying of refrigerant, natural gas and methane

3. Drying unsaturated hydrocarbons and cracked gas, ethylene, acetylene, propylene, butadiene

4. 3A molecular sieve and 4A molecular sieve belong to the same category


Product Basic Info
Product Specification

3A Molecular Sieve Adsorption for Gas Dehydration

CONTACT US
  • E-mail: bill@sd-avant.com
  • Tel.: +86 533 2802 131
  • Fax: +86 533 2802 131
  • QQ: 499093556
  • Add.: Room 811, Chuangye Building, Beijing Road, Zhangdian, Zibo, Shandong, China 255000
FOLLOW US